DC 5-12V/15-160V Stepper Motor Controller, Stepper Motor Driver, Pwm Controller for Control The Speed of The Motor

Description:This controller can generate a PWM signal functions, the board has a jumper, you can set the default selection provided in the pulse frequency signal.Features:This module is supplied as a stepper drive signal. To control the stepper motor, but also must have the drive to use. The controller has high, medium and low total of three types of frequency signals can be used to select jumper. Frequency of measurement can amount PUL and common cathode terminal (GND) two ports. PUL + and PUL- pulsed positive and negative; EN + and EN- is to enable the positive and negative terminals; DIR + and DIR- are the positive and negative directions. These six lines are connected to drive the corresponding pulse, direction, so six ports possible. Power supply: 15-160VDC or 5-12VDC. If you are using 5-12VDC power, positive end connect DC 5-12V Input, negative end connect Common Cathode End. The forward and reverse of the motor can be controlled by pressing the key. The speed of the motor can be controlled by adjusting the frequency of the potentiometer.Specification:Power supply voltage: 15-160V / 5-12VFrequency: High: 5.8KHZ-127KHZ, Mid: 590HZ-15.8KHZ, Low: 82HZ-2.3KHZSize: Approx. 50 x 51 x 37mm / 1.97 x 2 x 1.45inchWeight: 50gQuantity: 1pcsPackage List:1 x PWM GeneratorNote:1.If you use to start or stop the function, ENA controller enable terminal must be connected to common cathode or common anode drive.2. Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering

• Multiple Frequency Options: DC motor speed controller covers the range of high frequencys (5.8KHz-127KHz), medium frequency (590Hz-15.8KHz) and low frequency (82Hz-2.3KHz), which can be flexibly switched according to actual needs
• Compatibility: The motor controller supports two power input ranges: 15-160VDC or 5-12VDC, and only needs to connect the positive terminal to the DC 5-12V input and the negative terminal to the common cathode to work properly
• PWM Signal Generator: Stepper driver can generate PWM signal, through the jumper setting, the user can easily select the default pulse frequency signal, simple and convenient operations, suitable for a variety of application scenarios
• Easy to Operate: The generator motor can be easily controlled for forward and reverse rotation through buttons, and is equipped with a potentiometer to adjust the pulse frequency, thereby achieving precise control of the motor speed
• Compact Design: The DC motor controller measures approximately 50 x 51 x 37mm in size, weighs only 50g, and is compact in size, making it easy to integrate into various devices or projects, saving space while ensuring good portability